General system description
CAP’s covers feature a submerged model with the engine integrated into the winding shaft, so there is no need for a separate pit for the engine only.
Ideal for swimming pools with screen coating
The winder is submerged and is supported by two AISI 316L stainless steel side plates attached to the pool frame.
A safe and quality system
- 24V Submersed gearmotors of 170 Nm, 250 Nm and 500 Nm, IP68 protection, direct directional 98/37 / CE, 73/33 / CE and 89/336 / CE.
- AISI 316L stainless steel winding shaft.
Coverage is automatically actuated using a 3-way non-interlock key command and limits are programmed electronically.
In order to make the cover even more secure, the cover contains safety latches, installed at the edge of the pool.
Technic design:
Product sheet:
- 24V immersed gearmotors of 170 Nm, 250 Nm and 500 Nm, IP68 protection, defined by directives 98/37 / CE, 73/33 / CE and 89/336 / CE.
- AISI 316L stainless steel winding shaft;
- Side plates in AISI 316L stainless steel,
- Control box with associated limit switch;
- 3-position key switch without locking;
- Safety locks;
- PA6 mounting bracket (Nylon);
- IPE wood deck to cover the winder gap; (optional)
- Fiber-bundled or fiber-reinforced HEB beam, which supports the deck of the winder housing. (optional)
Products Record
